What's a good replacement hop-up unit for the Tactical???? I know that it has a two piece hop-up. Will the systema hop-up work???? How about the hop-up bucking??? I found online that the systema bucking might not fit.
0
What's a good hop-up substitute????
Started by
Rockhound
, Jun 25 2008 11:04 PM
8 replies to this topic
#2
vic_man4
-
- Members
-
- 591 posts
Specialist
- Location:Niagara, Ontario, Canada
- Interests:Airsoft, XBox 360 (GamerTag = CovertMaz), Cars, and HEAVY METAL \m/
Posted 26 June 2008 - 06:48 AM
Rockhound, on Jun 26 2008, 12:04 AM, said:
What's a good replacement hop-up unit for the Tactical???? I know that it has a two piece hop-up. Will the systema hop-up work???? How about the hop-up bucking??? I found online that the systema bucking might not fit.
Have you even looked HERE yet?
#4
vic_man4
-
- Members
-
- 591 posts
Specialist
- Location:Niagara, Ontario, Canada
- Interests:Airsoft, XBox 360 (GamerTag = CovertMaz), Cars, and HEAVY METAL \m/
Posted 26 June 2008 - 01:59 PM
Rockhound, on Jun 26 2008, 12:04 AM, said:
I found online that the systema bucking might not fit.
To answer your question about the systema hop up bucking......
Radix, on May 2 2008, 08:34 AM, said:
This is the official 3rd party compatibility list. Only 100% compatible (drop in) parts will be listed here. There will be 2 ratings for each of the parts, "KWA TESTED" or "USER TESTED".
INTERNAL
5. Systema hop up bucking - worked with stock hop up and DBC barrel (USER TESTED)
INTERNAL
5. Systema hop up bucking - worked with stock hop up and DBC barrel (USER TESTED)
Taken directly from HERE...
#5
Rockhound
-
- Members
-
- 19 posts
Newbie
Posted 26 June 2008 - 09:35 PM
vic_man4, on Jun 26 2008, 02:59 PM, said:
If you look at the title and first part of this thread, I'm asking about the whole hop-up unit not just bucking. The hop-up bucking comes secondary to the whole hop-up unit I'm asking about. And I did see that thread! I wouldn't be posting this thread if it answered my question. All the 3rd Compatibility List has is the hop-up bucking. Yes, I know its number 5 on the list, but again, I'm asking about the whole hop-up unit. If there is a good metal replacement for it.
#6
Doctor Kajita
-
- Members
-
- 163 posts
Enthusiast
- Location:San Francisco, CA
Posted 26 June 2008 - 10:54 PM
Rockhound, on Jun 26 2008, 10:35 PM, said:
If you look at the title and first part of this thread, I'm asking about the whole hop-up unit not just bucking. The hop-up bucking comes secondary to the whole hop-up unit I'm asking about. And I did see that thread! I wouldn't be posting this thread if it answered my question. All the 3rd Compatibility List has is the hop-up bucking. Yes, I know its number 5 on the list, but again, I'm asking about the whole hop-up unit. If there is a good metal replacement for it.
Why would you replace the hop-up unit anyway?
#7
GOLGO 13
-
- Members
-
- 66 posts
Enthusiast
- Gender:Male
- Location:San Diego/Aomori Japan!/anywhere they send me
- Interests:Airsoft, Hondas, Guns, Girls anything that takes my time and money pretty much =)
Posted 27 June 2008 - 06:38 PM
I put a Prometheus Neo strike chamber in my KWA, it is very similar to your systema unit in most respects(star wars reference)
read the entire compatability thread for pix and such, particularly my post.
read the entire compatability thread for pix and such, particularly my post.
#8 Guest_allizard_*
Guest_allizard_*
-
- Guests
Posted 27 June 2008 - 10:24 PM
KWA M4 are using a two piece design similar to Marui. I haven't found any direct replacement hopup unit. however it doesnt stops you if you MUST use a 1 piece design like a Systema, you just have cut out all the metal that's inside the lower reciever so a one piece will fit in. It's entirely possible. Golgo13 have done it.
On the other hand, I've found the stock hopup unit is just as good. I like ABS hopup unit as it's give more torrence when mashing with the nozzle. Provide a better seal than metal. But that's just me.
On the other hand, I've found the stock hopup unit is just as good. I like ABS hopup unit as it's give more torrence when mashing with the nozzle. Provide a better seal than metal. But that's just me.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
