13 replies to this topic

[sparrowhawk]

ive got an M9 ns2,and i want to remove the gas block to access the return springs,which have broken, ive removed the hex bolt out of the safety, but the safety doesnt come out,im not sure what to do,i believe the removal of the saftey is key to the removal of the gas block....thanks for any help

[Spiggy]

depress the mock firing pin in the safety drum.

[sparrowhawk]

thanks for your reply,where abouts is it?

[Spiggy]

turn the safety on your gun, look in the back where the hammer falls into.  That indent is the thing you want to poke.

[xKingSizex]

Spiggy, on 05 August 2010 - 10:48 AM, said:

turn the safety on your gun, look in the back where the hammer falls into.  That indent is the thing you want to poke.

that's what sh...oh, nevermind.

[sparrowhawk]

Spiggy, on 05 August 2010 - 10:48 AM, said:

turn the safety on your gun, look in the back where the hammer falls into.  That indent is the thing you want to poke.

ok,but the safety doesnt want to move,do i tap it out,as i poke the indent....dunno something doesnt seem right,there must be another catch or pin stopping it, the pistol is a KSC heavyweight M9 NS2 not a KWA PTP

[Spiggy]

well there's your problem then, it's not a KWA item!

[sparrowhawk]

Spiggy, on 05 August 2010 - 03:15 PM, said:

well there's your problem then, it's not a KWA item!

yeah coz they are 100% totally different guns arent they....and they do not share any similarities in any shape or form...


well actually my problem is,no-one has posted anything on how to take a KSC M9 apart, but there are a few bits on the KWA...thats why i was here

[sparrowhawk]

sparrowhawk, on 06 August 2010 - 04:08 AM, said:

yeah coz they are 100% totally different guns arent they....and they do not share any similarities in any shape or form...


well actually my problem is,no-one has posted anything on how to take a KSC M9 apart, but there are a few bits on the KWA...thats why i was here

seriously...thanks for your help, ive done it now,what i needed to know was after pushing in the knob at the back,i should rotate the safety in the opposite direction, and then it comes out....

[Spiggy]

sparrowhawk, on 06 August 2010 - 04:08 AM, said:

yeah coz they are 100% totally different guns arent they....and they do not share any similarities in any shape or form...


well actually my problem is,no-one has posted anything on how to take a KSC M9 apart, but there are a few bits on the KWA...thats why i was here

there are enough subtle differences that make ratings, modifications, and finetuning completely different.

[black_stone316]

sparrowhawk, on 06 August 2010 - 07:57 AM, said:

seriously...thanks for your help, ive done it now,what i needed to know was after pushing in the knob at the back,i should rotate the safety in the opposite direction, and then it comes out....

Hi man..how is working now the gun? any issue?

I have the same issue with mine.. and I will made the repair by myself.. so it would be great any recomendation or advice.. and how is working, shooting, how goes in fps now your gun?..

See you and have a great day.

[sparrowhawk]

after taking it apart,and seeing what needed replacing i have put the gun in a box and left it in pieces,because i am not desperate to fix it,because i have a KWA PTP that works perfectly already,and some other guns that need my attention and money

[black_stone316]

sparrowhawk, on 23 October 2010 - 05:02 PM, said:

after taking it apart,and seeing what needed replacing i have put the gun in a box and left it in pieces,because i am not desperate to fix it,because i have a KWA PTP that works perfectly already,and some other guns that need my attention and money

Ok, thanks anyway

[black_stone316]

I've fix mine and now works excelent..

Thanks KWA.