493 replies to this topic

[ndfan6464]

Think this will work on the SR7?

http://madbull.com/c...&products_id=51

http://madbull.com/c...products_id=113

If so would there be any perm. MOD to the rifle that would need to be done? Iam trying to stay away from doing any perm. MODS so I can switch back to stock SR7 if I want to..

Edited by ndfan6464, 08 February 2013 - 10:17 PM.

[steelfallenangel]

Update on the CAA handguard.

Fit requires heavy modification to both handguard and gun.

First you would need to shave off very carefully enough material to get the rear of the handguard to fit into the delta ring. And even if you get that to fit you need to outright remove or replace the fuse of the gun since the stock fuse is to large for the bottom half of the handguard to close and look flush.

And then even then you would be extrememly restricted on what batteries you would be able to use.

The handguard is really only designed for a rear wired gun. Which is a mute note since most rear wired guns have full RIS anyways.

Way more trouble than it was worth. It looks great and gives the gun almost a SIG 551 look but its really more trouble than its worth.

[ndfan6464]

forgive me if this has been posted already

Madbull Daniel defense 4" lite kit works on SR7 (user tested)

http://www.evike.com...oducts_id=36443

 SR7 MB DDF (2) (800x433).jpg   201.41K   22 downloads

[xepharo]

I don't think this has been mentioned before, nor did I see it in the search results, but "Beta Project PMAG 75rd Dark Earth" does work on the KWA SR7 that I got here in Taiwan. I actually bought it from the state side (West), and brought it back to Taiwan during a business trip. Feeds great also.

[sgtash]

Has anyone got any ideas on what third party metal body will take a 2gx v2 gearbox ?

[gcw360]

sgtash, on 02 March 2013 - 09:00 AM, said:

Has anyone got any ideas on what third party metal body will take a 2gx v2 gearbox ?

Few if any will fit without significant modifications to the receiver, the gearbox, or both.

[sgtash]

Thanks for the reply, I take this is due to the design changes to the 2gx gearbox in the area of the cylinder, so only a kwa top receiver will fit ?

[gcw360]

sgtash, on 02 March 2013 - 11:47 PM, said:

Thanks for the reply, I take this is due to the design changes to the 2gx gearbox in the area of the cylinder, so only a kwa top receiver will fit ?

Correct.

[badkarmaas]

arunser10@aol.com, on 20 January 2010 - 04:48 PM, said:

Since this discussion about Magpul grips(on the new 2009 M4 RIS) came up I want to make things clear. I was looking to buy a new Magpul grip, and the three that I was looking at are...MagPul PTS MIAD Grip, MagPul PTS MIAD Grip V.2 and MagPul PTS MOE Grip. If you know anything about these grips working or not, please post something. Please be clear to, don't say something like"I think I know some body who says one of these may work"or something like that...YES or NO please. I don't want to do ANY moding to the grip or gun at all. If anybody has experience with these grips please post about the comfort and feel too.
                                                                                                                                                            Thanks!!!

I have also been looking at the UTG Reinforced M16 Series Pistol Grip and the Ergo Grip...fit don't fit??? confortable???

Dose the KWA stock motored plate fit on the MagPul PTS MIAD Grip, and if it does, does it fix the problem of ridding the motor to high? I know I would pick performance over looks any day...well to an extent.


http://www.airsoftgi...roducts_id=2369

http://www.airsoftgi...roducts_id=3532

http://www.airsoftgi...roducts_id=2367

http://www.airsoftgi...roducts_id=1446

http://www.airsoftgi...roducts_id=3227

I have the miad grip. I just put it on, no problems. I've had it for a year.

[Josh328]

Anyone know what has tubes are compatible with the KM4 RIS 2GX to replace the front sight?

[ohlegend]

Add King Arms CAA licensed High Cap Mags (350 round) a little tight, but not horrible.
I have the 2GX KM4A1 and Pmags and Emags fit great.

[iFrost]

Does anyone know if the G&G Sopmod stock will fit on a SR7, and if it'll fit a 9.6 nunchuck?

Also, would any modifications need to be done?

Thanks!

[Ethan]

 iFrost, on 03 May 2013 - 09:29 PM, said:

Does anyone know if the G&G Sopmod stock will fit on a SR7, and if it'll fit a 9.6 nunchuck?

Also, would any modifications need to be done?

Thanks!

I heard it will fit on the kwa km4 and cqr series but it uses stick battery instead of the nunchuck battery.

Edited by Ethan, 12 May 2013 - 09:29 PM.

[TicTac]

The guarder aluminum piston head works but is a pretty tight fit