43 replies to this topic

[coulombecrew]

SRC upper barrel assembly fits great.  Haven't fired through it yet to verify air seal. So far length seems right.  Will update in a bit. Noticed in another thread the SRC didn't fit.  My packaging seemed generic with no SRC logos/writing. So I'm not sure if it truely is an SRC.

Update:
Gun fired flawlessly.  Rechronoed @395 w/ a beat up  used stock spring and 425 tight bore.  OEM 2/3yrs ago it chronoed @ 370 stock.
Here's where I got it : http://www.airsoftst...srcsg3607-.html

Edited by coulombecrew, 19 April 2012 - 04:44 AM.

[philsaudio]

User tested with a KWA rebuilt Pre-2GX G36C using:
9.6V NiMH 1600mah ( both mini and mini nun chuck fit) (15RPS)
and
7.4V 1800mah 25C LiPO Tenergy nano-tech. (16RPS)

SRC   hi-cap mags -- Flawless feed
JG Came with JG gun hi-cap mag---Flawless feed
JG Hi-CAP mag ---bought separately package marked in chineese ---- Flawless
CA Classic Army G36 mag ---flawless
Echo1   C-mag --- Works
H&K       (umarex) Flawless feed.

Edited by philsaudio, 19 November 2012 - 08:23 AM.

[philsaudio]

dsdehan, on 16 December 2010 - 03:53 PM, said:

Will an src g36k handguard fit?

My SRC Gen II and Gen III handguards fit on the pre 2gx G36c as does the JG Gen IV and an old Classic Army handguard. The pre 2gx replica I have is one with the JUMBO handguard. The push pin that holds the guard on is not the greatest fit both with the others in the KWA and with the KWA jumbo on the others. The pin is un-instaliable when swapping the other handguards with the KWA.

KWA seems to be "kinda" TM compatible with this as with other items on this replica.

I tried an aftermarket grenade launcher/ handguard the other day and it fit okay.


(revised 3-4-2013 after mixing up the handguards and finding the push pin not to engage properly)

Edited by philsaudio, 04 March 2013 - 07:14 AM.

[philsaudio]

I tried the SHS G36 aftermarket hop up in my KWA pre-2gx G36C. It all fits in there upon visual inspection; but the airseal is not what it is with the KWA hop up. Not compatible with my G36 IMHO.

Peace