5 replies to this topic

[SeekND]

Hi guys!

I've just recently purchased a FPG Conversion Kit but I've been unable to use it so far.
The problem resides in the trigger not working whenever a mag is inside.
While cocking the gun manually without any mag seems to work (most of the times), as soon as a mag goes inside the trigger only works for the first time.


I've managed traced the problem to a single lever (shown in the picture below) just next to the cocking lever.
http://img600.images...12013100197.jpg

Also found the exact same issue in a youtube video clip:

If i force the lever (or force the upper receiver forward when assembled) I hear a click and then the trigger becomes active and releases the "firing pin" and cocking lever.


Is this the normal working operation with the FPG?
Clicking it to place requires some force but it seems the upper glock receiver doesn't have it.



Any help would be deeply appreciated!

Edited by SeekND, 31 January 2012 - 01:57 PM.

[niko_gpsy]

Do you own a complete KWA FPG?  Because I don't think KWA makes a conversion kit.  KWA FPG is a complete gun and is different than a conversion kit gun.

[Outlaw1995]

I believe at one point, KWA did initially make a conversion kit for old M18 users before they released the completed FPG. You would take off the slide from your M18 and stick itin the FPG. Don't quote me though...

Edited by Outlaw1995, 01 February 2012 - 06:26 AM.

[xX Chaotic Cam]

Outlaw1995, on 01 February 2012 - 06:22 AM, said:

I believe at one point, KWA did initially make a conversion kit for old M18 users before they released the completed FPG. You would take off the slide from your M18 and stick itin the FPG. Don't quote me though...

I believe it was Magpul PTS who made the kit, not KWA.

[niko_gpsy]

xX Chaotic Cam, on 14 February 2012 - 12:27 AM, said:

I believe it was Magpul PTS who made the kit, not KWA.

I think you are right.

[xKingSizex]

The Magpul FPG conversion kit was not manufactured by KWA and this thread will now be closed.