9 replies to this topic

[fightin-irish2-2]

i know this is the atp forum but you have no glock forums so my question is
where do i find the little pin on the back of the slide of a kwa glock18c that holds the slector switch
i.e the firing pin
i bought a KWA 18c of a guy used but its missing its firing pin so i need to know where i can get one

[Boss302]

There should be some in the pro shop http://store.kwausa....ignmentpin.aspx I believe they also have some at Airsoft GI.  Also, just to give you the heads up, there is a "glock forum" its under the M Series folder.

[Outlaw1995]

fightin-irish2-2, on 01 April 2012 - 06:55 AM, said:

i know this is the atp forum but you have no glock forums so my question is
where do i find the little pin on the back of the slide of a kwa glock18c that holds the slector switch
i.e the firing pin
i bought a KWA 18c of a guy used but its missing its firing pin so i need to know where i can get one

Hey dude, there actually is a "glock" series or M-Series as kwa calls it forum on the forums. It's called M Series. And boss302 is right, on both accounts, go to kwa's proshop: store.kwausa.com or give them a call if the online store doesn't have the part.

[gcw360]

Topic moved...carry on.

[fightin-irish2-2]

kk thanks

[fightin-irish2-2]

one more thing where would i find the entire blowback unit for a glock 18
and to diagnose a problem if on the first shot all the gas shoots out what is that

[gcw360]

Contact KWA for the parts you are looking for.  Regarding the gas dumping, often lubricating the hammer assemble and the gas release valve will fix that problem. After lubing the hammer assembly, work it manually 15 or 20 times.  This helps to work in the oil and get things moving again.

Let us know if that works.

[fightin-irish2-2]

where can i find oil

[gcw360]

Just go online and buy some R/C shock oil.  I use 30 wt. with good results.  You can go lighter though like 15-20 wt.

[fightin-irish2-2]

okay thank you