5 replies to this topic

[Deegz]

Question for niko_gpsy, I was looking through previous forums/topics and saw your Sr-12 with a dragon fire and blackside extension on it.  
-Few questions about that
       1. Do you have a gas block still?
       2. Do you have a ris fix to prevent it from wobbling?
       3. Does the original barrel have a two piece that is taken apart so that the new extension can fit inside the ris or is it just that long that it went over it the blackside extension.

Here is the picture that was in the forum-

Attached Files

•  photo11.jpg   29.43K   35 downloads

[niko_gpsy]

Deegz, on 23 May 2012 - 01:35 PM, said:

Question for niko_gpsy, I was looking through previous forums/topics and saw your Sr-12 with a dragon fire and blackside extension on it.  
-Few questions about that
   1. Do you have a gas block still?
   2. Do you have a ris fix to prevent it from wobbling?
   3. Does the original barrel have a two piece that is taken apart so that the new extension can fit inside the ris or is it just that long that it went over it the blackside extension.

Here is the picture that was in the forum-

Hey Deegz

Welcome to the KWA forums.
With my Dragon Fire 16.25" rail, I am running an SR10 outer barrel with the gas block and tube. Even without the tube it does not wobble but I added for extra stability.  If you ever find that the rail still wobbles you can always use a Madbull MAX Tactical RAS fix like this one............... http://www.airsoftgi...roducts_id=5226

And the original SR12 barrel is not a 2-piece design so you will have to purchase a separate barrel if you want to achieve the look of my DMR.  If you have any further questions please don't hesitate to ask.  I am more than happy to help any way I can.

[Deegz]

Alright thanks! Where did you get your sr-10 outer barrel from?...and I am guessing the gas block came on it right?  Or could I just buy a 14.5 in. barrel and that would work to right?

Edited by Deegz, 23 May 2012 - 04:07 PM.

[niko_gpsy]

I used the barrel from my SR10 that I didn't need anymore after the JP rifle conversion kit. But you can buy a Madbull external barrel that's similar in length.  Madbull external barrels work well with KWA guns without any need for mods.

[Deegz]

Alright thanks man!  Oh and also would you say you really still like your set up of that way and has it been working good?

[Deegz]

Ha sorry about all the questions but also would this gas block work with the set up?

http://www.evike.com...oducts_id=30517

Edited by Deegz, 23 May 2012 - 07:41 PM.