27 replies to this topic

[niko_gpsy]

Actually getting at least 310ft with 560fps on DMR but haven't checked accuracy yet.
I was thinking of something more simple than RHop for my battle rifles instead of RHop. Really don't need much more than 200ft flat.

[sdk1968]

its a slow day at work so ive been tearing the net up on these.....

simpler install and much faster than the Rhop.

but its gonna be all about the bucking holding up.

i actualy scored one of these already and its on its way.    :-0

[niko_gpsy]

I agree. But it's worth a try.

[superfrog]

nah, a complete rhop only takes about 40 minutes.  but the flat hop is very interesting. a friend of mine installs them for a lot of people in sc.

[greatwatermelon]

Tokyo Marui bucking sitting on my shelf seemed to be fairly thin like the 2gx bucking. When I get back to my apartment in Southern California, I'll have a look at how well it fits and works in the KWA. Could be a good alternative.

I agree that the G&G Green Bucking is exceptional BTW. One of my favorite buckings to use as well.

In terms of 2GX bucking not performing well in KWA's, I noticed in my SR10 when I first purchased it years back, that the bucking was deformed perhaps in the process of putting it back together. The hop up couldn't line up straight and caused bb's to have a wide spread and short range.

I resolved that by replacing the bucking and hop up unit, and tightening up my loose rail on the upper receiver.

[sdk1968]

FROG,

my times ahve gotten better at the install but your still way faster than me at it.  

[vanevery]

greatwatermelon, on 21 June 2012 - 02:31 PM, said:

I agree that the G&G Green Bucking is exceptional BTW. One of my favorite buckings to use as well.

Picking up the G&G green bucking today along with the King Arms 80 degree (purple) from a local airsoft store.
I actually already have a G&G green bucking and use it in my JG m4 S-System with a KWA 395mm inner barrel and JG Hop-up.
I tried to install it in my KWA Hop-up unit without success over a year ago.
I am feeling more confident that I can install it due to the fact I recently was able to install a Systema bucking in one of my KWA Hop-ups where as before - over a year ago as well - I could not get it to fit.

The G&G green bucking will first be tested in the KWA Hop-up unit and 395mm inner barrel in a KWA 2gx M4A1.
I will be comparing this gun to my JG M4 S-System, which shoots lasers with the above mentioned set-up.
I will use the KA 80 Degree bucking with a KWA Hop-up unit, MadBull 509mm inner barrel, and test it in the same 2gx M4A1 due to it having the .5 cylinder, same as the KWA 2gx m16.

It will be next weekend before I can actually test.

Edited by vanevery, 22 June 2012 - 08:10 AM.

[sdk1968]

i really like the G&G Greenie bucking.  

its been a beast in the guns ive put it in.  never tears, never wears out.... great air nozzle seal.