6 replies to this topic

[Keirosabi]

Hey there gals and gent! I need help identifying this part from a 2GX gearbox.

I opened up the GB and as I was removing the spring, I looked down and this part was sitting on the table. I know what its NOT and I dont want to drop back in the GB until I know what it IS. Thanks guys!

[karl_azytzeen]

This spring is installed in the arm that locks the trigger in safe mode. It pushes he arm to lock the trigguer, and when you go to semi/auto the selector plate moves it to unlock trigger.

Edited by karl_azytzeen, 13 June 2012 - 12:47 PM.

[Keirosabi]

Cool Thanks! Inside what arm? DOes it go inside the gearbox or outside? Sorry I'm new to KWA GB's so could you elaborate on how to re install it?

[karl_azytzeen]

Its the same for all V2 Gearbox.

Edited by karl_azytzeen, 13 June 2012 - 02:21 PM.

[Keirosabi]

Nope I dont think its that spring. That spring is present. I checked and I just tested the little lever that sits in front of the tappet and its spring loaded. I bought it used maybe its an extra piece left by the last person to open it....?

[karl_azytzeen]

Maybe im wrong because i dont had any thing to compare the size in the picture, but que antireversal spring had the same form ,but its smaller.

Antireversal is the T shaped piece that is placed near Bevel gear. Pic Updated

Edited by karl_azytzeen, 13 June 2012 - 03:48 PM.

[Keirosabi]

Thats what I thought too but everything seems to be acounted for. Im thinking when I reached for the tool I stick into the back of the spring guide I might have picked up the loose part as well. sometimes theres little loose peices like that floating aroung in my toolbox. Hey thanks for all your help though! If for some reason the gearbox runs funny Ill jump on ask again, lol...